Also known as a Signal Generator, it is used to generate electrical test signals with specific parameters required by the circuit under test.

How to set up the high sensitivity of the Spectrum Analyzers to facilitate the observation of small signals? A: first, set the corresponding center frequency sweep width (span) and reference level according to the size of the small signal under test

When your Spectrum Analyzers cannot be shipped due to the electromagnetic interference emission intensity exceeding the electromagnetic compatibility standard

First, set the corresponding center frequency, span and reference level according to the size of the measured small signal; then gradually reduce the attenuation value, if the Spectrum Analyzer does not have an overload indication;

In fact, from the perspective of principle, the arbitrary waveform generator such as 3GHz Signal Generator is the inverse process of the oscilloscope. Does the arbitrary waveform generator also have so-called three major indicators?

The main function of the Spectrum Analyzers System is to display the spectral characteristics of the input signal in the frequency domain. There are two types of spectrum analyzers depending on the signal processing method;