Analyzer

Home - Services-FAQs-Analyzer

FAQs

Analyzer

Q: Does SA2300 have THD measurement function? What about the measurement range?

A:

Yes, you can find THD measurement in harmonic mode, ranging from 0% to 100%.

Q: What is the maximum recording time of the logger in SA2300?

A:

Usually one year, this depends on time interval.

Q: I couldn’t transfer measurement data from SA2100 to USB disk. When I plug in a pen drive into the USB port, the USB button does not get highlighted and thus nothing can be copied. Please help me.

A:

Only USB disks with a capacity of less than 32GB and in FAT32 format can be recognized by SA2100. Please format your USB disk and plug it into SA2100 again, check whether “To USB” is highlighted, if yes, select the files you want to copy and press F2 to confirm.

Q: Why are there no harmonic measurement data in the PQA report from the SA2100?

A:

In Logger function, there is a “ParamSelect” key as Fig.1 shown:

Why there are not any measuring data for harmonics in the PQA report in SA2100?cid=53

Fig.1

If users need to log harmonics, “Uharm” and “Iharm” should be selected as Fig.2 shown:

Fig.2